Mitre Shears/Mitre Angle Trim/PVC Decking Cutter

Product Information

Sliding Compound Mitre Saws are used in woodworking, DIY, construction and wherever a high degree of precision and repeatability is required by the user.

PVA Glue Reinforcement: Do not forget to reinforce the structural pieces with PVA glue during assembly to increase its resistance. A Double Bevel Saw can rotate both left and right, about the vertical plane, to make bevel cuts on both sides without having to flip the workpiece. In the following example we used 20mm thick hardwood and went through the set-up routine from scratch. The clear disc has indentations that help the blade cleave over materials, and the measurement diagrams below allow you to cut pieces to the same size. Practice this procedure until it becomes familiar, and you’ll be able to quickly home in on the exact settings for other thickness materials.For laying engineered wood and luxury vinyl flooring we’d choose the R210SMS-300+ and a 210mm Fine Wood blade; that’s the perfect Mitre Saw for cutting any flooring up to 300mm in width. All Evolution corded and cordless Mitre Saws can cut metal as well as wood, plastic and composites straight out of the box with our Multi-material blade. This is especially useful when fitting skirting boards, coving and dado rails, as these can be sawn to the exact angles required by the installation. A standard mitre saw features a circular spinning blade on an arm, which can pivot to make angled cuts at 90° and 45°. Whether you are a picture framer, a carpenter or a cabinetmaker the need for accurate mitres is paramount.

With blade sizes from 185mm to 255mm, Evolution Mitre Saws will cover you for all of your cutting needs. This pivoting motion lets you achieve more complex cuts such as bevelled angles, while our models with built-in laser guides guarantee precision cuts. Note: For your first practice cuts you might choose to use 18mm MDF (or whatever thickness is appropriate for your particular cutter) since it is cheap and plentiful, and you need to practise the set-up routine until it is familiar.Precise set-up is essential to get good results with this cutter, and the set-up is specific to the thickness of your workpiece. The maximum cut depth on a Mitre Saw depends on the blade size and the clearance around the blade guard. Our range of compound mitre saws offers improved performance compared to standard mitre saws, with their ability to pivot left and right as well as tilt.

This saw is equipped with a blade that can tilt in addition to the typical angled cutting capabilities of a mitre saw. The trouble is that the bottom of the board is cut to a razor sharp edge and as the cut progresses the board tends to sink under its own weight. Top of the range mitre saws come with laser technology for cutting accuracy and we also have corded and cordless options available, should this be an important consideration factor.At Evolution, we have several Mitre Saw Stands available, as well as special Mitre Saw bundles with the stand included. If you try to cut in one pass, the cut will be very heavy and difficult to control, especially the vertical cut, so take two or more passes, moving the fence back between cuts. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.