6 Mini White Terracotta Plant Flower Pots for Crafts - 4.6cm High (No Hole)

Product Information

Mold on soil is generally not something you need to worry about. It’s harmless, but it can point to the fact that the soil is staying wet for too long, which can lead to root rot, which is why it’s good to do the things I mentioned, to have the soil dry out faster. If you buy clay pots that are brand new, run them under water and lightly scrub them with a cleaning brush or a pot brush before painting them.

Being made from natural clay instead of synthetic materials prepared after excessive processing, the terracotta pots are certainly an environment-friendly addition to the garden. We are delighted to offer the entire range of Laura Ashley and J. Chamberlain & Co. glazed terracotta Garden Pots and Planters this season. Keep this in mind if you’re used to using plain terracotta pots, so that you don’t end up overwatering your plants. Step 4: Paint your pots – Use your foam sponge brush to paint the base coat. After you have your base coat on the terracotta pot, use non-thinned paint to add 2-3 additional coats.One you’re done painting your pots, I definitely recommend using spray sealer over the paint to protect your hard work. This won’t completely seal the pots, so they will still be able to breath. Remove excess organic matter from the pot. Fungi feed on organic matter to survive. Removing dead leaves and other organic debris around the pot will help remove the fungi’s food source.

However, because of their porous nature, terra cotta pots are often moist — making it easy for mold to grow. But a deep clean is sometimes the only way to eradicate a stubborn mold infestation (which could also lead to some nasty white fungus balls in your soil). Thank you for your message! Regarding mold on soil, to prevent it from forming, you want the soil to stay wet shorter/dry out faster and there are a few things you can do to make this happen: Then, grab your gloves and make a bleach solution, measuring one part bleach to nine parts of water. Soak the pot in this mixture for an hour, then scrub it until you have removed all visible mold. You don’t want any residue or powder on the pot – the paint will look lumpy if the pots aren’t clean.

Report an Issue

Allow the pot to sit for at least 15-20 minutes with hydrogen peroxide solution on it. You might notice the sputter due to the acid-mold interaction. Then use a separate kitchen sponge, scrub, or a spare toothbrush to scrape all the growth off the pot. Instead of spraying, the pots can also be left dipped in water and hydrogen peroxide solution if you have got them empty for cleaning. In the end, you might want to rinse it off with clean water and let it dry In direct sunlight for a while. Your port is now completely clean.